Home > Products > Rules for Encoding
Rules for Encoding
Encoding rules of LCD module
|
ET |
G |
320240 |
A |
V1 |
B |
C |
S |
W |
S |
W |
T |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
ET stands for SHENZHEN ET TECHNOLOGY CO., LTD.
320*240: Matrix of line-320 and row-240, where, A represents the 1st pattern of the model; V1 the 1st version of the model; B the LCD blue screen; C the transmissive LCD; S the six (6) viewing angle LCD; W the wide-temperature-range LCD; S the side backlight LED; W the white color of the backlight, and T the touch screen.
1＞ SHENZHEN ET TECHNOLOGY CO.,LTD.
2＞ Module display type: S: Pen display; C: Character dot matrix display; G: graphic dot
matrix display T：TFT LCM
3＞ Rows and lines of matrix.
4＞ The Ath --Z th patterns of the model.
5＞ Version number of the model.
6＞ LCD display mode: B (STN blue screen), F (FSTN), G (STN grey screen), T (TN), Y (STN
yellow-green screen), H (HTN).
7＞ LCD type: B (transflective), C (transmissive), H (reflective)
8＞ LCD viewing angle direction: U (3U), S (6H), L (9L), T (12H).
9＞ LCD working temperature range: N (0°~50°), W (-20°~70°).
10＞Type of light source: C (CCFL), D (bottom backlight), E (EL), S (side backlight),
N (no backlight).
11＞ Color of light source: B (blue), G (green), R (red), W (white), Y (yellow-green).
12＞ Touch screen: T.
Encoding rules of ET-HMI (Example: ET-T800480-07002CWN)
|
Description |
ET |
ET MCU intelligent display screen(ET-HMI) |
|
T |
Color: B= B= monochromic/double monochromic, D=256 colors(8 bit), T=65K colors(16 bit), G=16.7Mcolors(24 bit) |
|
|
800 |
Horizontal resolution：320、 480,、 640 ,、800 ,、1024,、 1280,、 1365 ,、1398,、 1920 |
|
|
480 |
Vertical resolution：240,、 480、 600 ,、768,、 800、 1050,、 1080 |
|
|
070 |
Visual size: 070=diagonal size of viewing area is 7.0 inches, and so on. |
|
|
02 |
Hardware version No.: 01-99 is used for distinguishing the different hardware version No., and so on. |
|
|
C |
Application classification: Common industry grade ( M =Low cost consumer grade, C=Common Industry product grade) ; I= High-end industrial grade , Q= Automobile grade, A= Military industrial grade |
|
|
W |
Working temperature range: N= Normal temperature(inside of -20°~70℃); W= Wide temperature (outside of -20°~70℃) |
|
|
T |
Touch screen: N=Non-touch screen; T= With touch screen |
1.Description of application classification
M series:
Low cost common
industrial grade, adopting the ARM kernel, and for
the upgrade of low-cost monochrome screen.
C series:
Common industrial grade, the touch screen and the LCD screen is
given priority to with domestic first-line brand (including Hong Kong and
Taiwan), continuous production line, without aging screening, the cost is very
competitive.
I series:
High-end industrial specification design and production, 100%
after high temperature aging screening, on these basis, it is increased
anti-corrosion coating, bad point selection and extension of the selection of
high temperature aging to further enhance the product quality; this series are
adapted to the products of which the harsh environment and the reliability
requirement is very high in the high-end industrial equipment.
Q series:
Specially designed for the automotive applications, with wide
voltage, high level of ESD, over wide temperature, high brightness, high
temperature and high humidity and good vibration impact resistance, etc.
Through the choice, special protective processing or screening test of the
screen, in order to satisfy the demands of special, demanding applications.(such
as explosion-proof type)
A series:
Specially designed for the military application, it refers to its performance
can reach to the military field using standard, it is much better than
industrial grade products with main performance in heat resistance and ultralow temperature in working temperature, quakeproof and stability, but the cost is also very expensive.）
2. The software application have two types with
the HMI instruction set ( all kernel) and ET-HMI screen, ET-HMI is recommended
to the new users.
3. 65k color and above industrial serial interface screen, which all can be set by hardware (or software) to adjust the Angle position.
4. 65k color and above industrial
serial interface screen, which all can work in the display status of normal (HxV)
or 90 ° deflection (VxH) by choosing the software.
